P-326-SL4 Inground Pool Ladders

 Saftron P-326-SL4 4-Step Pool Cover Compatible "Split-Ladder" for masonry swimming pools (Escutcheons included)

*** FREIGHT INCLUDED to all contiguous USA destinations ***

* Maintenance-Free * 5 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

Saftron's "Split" Pool Ladder is a European inspired design for use in swimming pools that get covered and uncovered frequently. The lower section of the ladder attaches to the pool wall below the water level, and two return-to-deck rails install on the pool deck above, leaving sufficient space in-between to allow most pool covers to fit without having to first move the ladder from the pool.

The split-ladder is also available in a 3-Step Rung version for persons who do not require a deep pool ladder.

Saftron Pool Ladders are made of 1/4" thick hard-shell composites that are unaffected by pool chemicals (chlorine, acid & salt) and reinforced internally by Schedule 40 Galvanized Steel that add strength and rigidity. As the reinforcing steel core is completely encapsulated, it does not come into contact with air or water so it is immune from rust or corrosion.

The hard-shell nonconductive composite material meets applicable USA codes in all states without the need for bonding (grounding), thus making it the ladder of choice for retrofit installations if only because the pool deck will not have to be dug-up to install grounding cables.

Product Features:

• Exclusive design gives unequaled convenience when used with with most pool covers.
• Color is an integral part of the material and not an after-coat (unlike powder-coated steel rails, the finish will never chip or flake).
• Non-metallic composite material does not get hot in the sun.
• Immune to the corrosive effects of Salt Water Chlorinator Systems.
• Non-conductive material conforms to NFPA and building codes without having to ground (bond) the rail.
• Maintenance-Free Material and Finish.
• Made in *U*S*A*
• 5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray & Black

Dimensions:

• Ladder portion is 35" High x 24" Wide x 7" Deep.
• Return-to-deck rails are 30" High x 26" Wide each
• Width between post centers is 19.5"
• External diameter is the industry standard (1.9" OD)

Installation:

Ladder portion attaches to masonry wall with included 3" flanges, lag-bolts and anchors. Deck grab-rails can be core-drilled & grouted permanently into the pool deck or installed using ANCH-1 Anchor Sockets for removable installations. A simpler and less costly installation option is also possible with Saftron's exclusive surface mount bases (SB-F) Note: Use of surface-mount bases adds 4" to the installed height of the deck rails. Saftron's reusable alignment jig (P-JIG-RTD) can facilitate installation of Anchor Sockets for the grab-rails. Two bases or anchor sockets are required for each rail. (Refer to the installation_instructions on this site for more details).