P-329-Z Pool Rail

Saftron Compound-Bend, Return-to-Deck "Pretzel" Swimming Pool Handrails. Set of two rails (Left & Right), 29" Tall x 29" Wide. Matching Color Escutcheons Included.

*** FREE FREIGHT to contiguous USA destinations *** 

* Maintenance-Free * 5 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

Saftron's Return-to-deck handrails are made of a 1/4" thick hard-shell composites that are unaffected by pool chemicals (chlorine, acid & salt).

Saftron's "Pretzel" shaped return-to-deck pool handrails are deck-mounted for use with in-wall step cavities. These rails are internally reinforced by an encapsulated Schedule-40 galvanized steel core for increased rigidity and strength. 

The P-329-Z rail is differs from the similar P-429-Z  model in that the back post is vertical instead of sloping towards the pool. 

The sexy compound curves of this beautiful rail make it the perfect choice for high-end swimming pool environments where standard looking rails are simply "not good enough".

Product Features:

• Encapsulated steel core give added strength and rigidity.
• Colors are an integral part of the material and not a paint after-coat, so they will never chip or flake off.
• Non metallic composite material does not get hot in the sun.
• Immune to the corrosive effects of Salt Water Chlorinator Systems.
• Non-conductive material conforms to NFPA and building codes without having to ground (bond) the rail.
• Maintenance-Free Material and Finish.
• 5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray & Black

Dimensions: 29" High x 29" Wide. Posts measure 8" between centers. External diameter of railing is the industry standard: 1.9" OD

Installation: It is best to install Pretzel Rails by core-drilling and grouting permanently into pool the deck or to install them using anchor sockets (ANCH-1 ). When these installation methods are not feasible or possible, surface mount bases (SB-F) may also be used. Saftron's reusable alignment jig (P-JIG-RTD) can be used to facilitate the installation of Anchor Sockets. Two bases or anchor sockets are required for each rail (i.e., 4 total). Refer to the installation instructions on this site for more details.