P-421-LP5 Inground Pool Ladders

Saftron P-421-LP5 Five-Step "Elite" Swimming Pool Ladder. 73" Tall x 21" Wide. (Includes Matching Color Escutcheons).

*** FREIGHT INCLUDED to all contiguous USA destinations *** 

 Saftron's beautiful Elite Pool Ladder is a custom design that may not be a suitable replacement if existing anchor sockets were installed previously for a standard pool ladder. (Standard pool ladder posts install 17" back from the face of the pool wall. The Elite ladder's posts install 7.5" back from the pool wall face). If you are looking for a standard footprint five-step pool ladder, see Model P-324-L5.

If the pool ladders you are looking for are for a new installation and the coping around your pool is compatible with the Elite pool ladder's footprint, this is by far the most beautiful pool ladder design on the market.

Saftron Pool Ladders are made of 1/4" thick hard-shell composites that are unaffected by pool chemicals (chlorine, acid & salt) and reinforced internally by Schedule 40 Galvanized Steel that adds strength and rigidity. As the reinforcing steel core is completely encapsulated and does not come into contact with air or water, the ladder is immune to rust or corrosion.

The hard-shell nonconductive material meets all applicable USA codes in all states without the need for bonding (grounding), thus making it the ladder of choice for retrofit applications as the pool deck does not have to be dug-up to install grounding cables.

 Product Features:

• Color is an integral part of the material and not an after-coat. (The finish will never chip or flake).
• Non metallic composite material does not get hot in the sun.
• Immune to the corrosive effects of Salt Chlorine Systems.
• Non-conductive material conforms to NFPA and building codes without having to ground (bond) the ladder.
• Maintenance-Free Material and Finish.
• Made in *U*S*A*
• 5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray & Black

Dimensions:

• Ladder is 73" High x 21" Wide.
• Width between post centers is 19.5" (Suitable for installation into existing anchor sockets that are between 19" and 20" apart and 7.5" (on-center) back from the pool wall face).
• External diameter is the industry standard (1.9" OD)
• Installed height above the deck is 22" when installed directly into the deck or with Anchor Sockets and 26" high when installed using SB-3  surface-mount bases.

Installation:

Pool Ladders can be core-drilled & grouted permanently into pool decks or installed using ANCH-1 Anchor Sockets for removable installations. A simpler and less costly alternative is to use Saftron's exclusive (SB-3) surface mount bases. Saftron's reusable alignment jig (P-JIG-L) facilitates installation of Anchor Sockets. Two bases or anchor sockets are required for each ladder. (Refer to installation_instructions for more details).