P-529-L3 Camelback Pool Ladders

  Saftron P-529-L3 Three-Step Camelback Swimming Pool Ladder. 55" Tall x 29" Wide. Includes Matching Color Escutcheons.

*** FREIGHT INCLUDED to contiguous USA destinations ***

* Maintenance-Free * 5 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

NOTE: The Camelback pool ladder is is a non-standard design that requires ladder posts to be installed only 3.5" back from the pool wall face. It will NOT be suitable for most swimming pool designs. Check the measurements for compatibility with your requirements to ensure you order the correct model for your swimming pool.

A similar pool ladder without the protrusion into the pool that you might want to consider is the "Elite" model P-421-L3 which installs 7.5" behind the pool wall face.

Saftron Pool Ladders are made of 1/4" thick hard-shell composites that are unaffected by pool chemicals (chlorine, acid & salt) and reinforced internally by Schedule 40 Galvanized Steel that adds strength and rigidity. As the reinforcing steel core is completely encapsulated, it does not come into contact with air or water, so the ladder is immune from rust or corrosion.

The hard-shell nonconductive composite pool ladder material meets applicable USA codes in all states without the need for bonding (grounding), thus making it the pool ladder of choice for retrofit installations if only because the pool deck will not have to be dug-up to install grounding cables.

Product Features:

• Pool Ladder Color is an integral part of the material and not an after-coat. (Unlike powder-coated steel ladders, the finish will never chip or flake).
• Non-metallic composite does not get hot in the sun.
• Immune to the corrosive effects of Salt Water Chlorinator Systems.
• Non-conductive material conforms to NFPA pool and building codes without having to ground (bond) the ladder.
• Maintenance-Free Material and Finish.
• Made in *U*S*A*
• 5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray & Black

Dimensions:

• Pool Ladder is 55" High x 29" Wide.
• Width between ladder post centers is 19.5" (Suitable for installation in existing anchor sockets that are 19" to 20" apart and 17" back from the pool wall face)
• External diameter is the industry standard (1.9" OD)
• Installed height above the deck is 20" when installed directly into the pool deck or when installed into Anchor Sockets and 24" high when installed using SB-3 surface-mount bases.

Installation:

Pool ladders can be core-drilled & grouted permanently into pool decks without additional hardware, or installed using ANCH-1 Anchor Sockets for removable installations. A simpler and less costly installation option is also possible with Saftron's exclusive surface mount bases (SB-3). Saftron's reusable alignment jig (P-JIG-L) can be used to facilitate installation of Anchor Sockets. Two bases or anchor sockets are required for each ladder. (Refer to the installation_instructions on this site for more details).