P-LS-20E Pool Steps

Economy Replacement Saftron Pool Ladder Step Rungs / Treads. Suitable replacements for any standard pool ladder with 1.9" Diameter grab rails and 19-20" spacing between centers. 2-5/8"  wide treads. Made from durable, high impact polypropylene. Priced as low as $8.65 each including delivery when ordering in quantity.

*** FREE FREIGHT to all contiguous USA destinations ***

* Maintenance-Free * Non-Corroding * Free Freight * 1-Year Warranty *

This discontinued model of step rung is being offered at below manufacturing cost while supplies last only.  It is a narrower step than the current model (2-5/8" vs. 3-3/4").

Saftron replacement Step Rungs are injection molded from durable Polypropylene and designed with extensive ribbing to withstand heavy loads. They are maintenance-free and unaffected by pool chemicals (chlorine, acid & salt).

Product Features:

• Color is an integral part of the material and not an after-coat. (The finish will never chip or flake).
• Non metallic material does not get hot in the sun.
• Immune to the corrosive effects of Salt Water Chlorinator Systems.
• Maintenance-Free Material and Finish.
• Made in *U*S*A*
• 1 Year Non Pro-Rated Warranty.

Available Colors: Taupe & Beige only.

Dimensions: 

• 19.5" width between-centers X 2-5/8" wide

Installation: 

Step rungs bolt to ladders by means of 5/16" 316 Marine Grade Stainless Steel Bolts, Nuts and Washers (available separately).

Important Note: Pool ladder step rungs from different manufacturers can vary slightly in width. If you are replacing a different brand of step rung on an existing ladder, we strongly recommend that you replace all the step rungs at the same time, or the size difference between one brand and another may impede proper tightening of the bolts on the shorter step(s). 

These Saftron replacement ladder steps are a discontinued color. They are brand new and carry a full manufacterer's warranty. While supplies last, they are being offered below their manufacturing