RTD-348 Pool Rail

Saftron RTD-348 3-Bend Return-to-Deck "Figure 4" Swimming Pool Handrails - 32" H x 48" W (Escutcheons included)

New Model: Continuously reinforced core for maximum rigidity and strength.

*** FREIGHT INCLUDED to all contiguous USA destinations ***

* Maintenance-Free * 5 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

This fully reinforced version of the popular P-348-RTD pool rail of the same dimensions (which only carries internal reinforcement at the posts) will eventually replace the P-348-RTD. Longer return-to-deck pool rails like this one need extra rigidity to properly support high leverage side-loads.  The continuous reinforcement of the RTD-348 pool support rail makes it far superior to the P-348-RTD for this reason, and in our opinion well worth the modestly higher price. We strongly recommend this model instead of the P-348-RTD pool rail.

Saftron's Return-to-deck handrails are made of a 1/4" thick hard-shell composites that are unaffected by pool chemicals (chlorine, acid & salt). Internally Encapsulated Schedule 40 Galvanized Steel throughout the entire core of this rail results in a beautiful, rigid, durable pool rail. 

Product Features:

• Colors are an integral part of the material and not a paint after-coat, so they will never chip or flake off.
• Non metallic composite material does not get hot in the sun.
• Immune to the corrosive effects of Salt Water Chlorinator Systems.
• Non-conductive material conforms to NFPA and building codes without having to ground (bond) the rail.
• Maintenance-Free Material and Finish.
• Made in *U*S*A* 
• 5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray & Black

Dimensions: 32" High x 48" Wide. Posts measure 8" between centers. External diameter of railing is the industry standard: 1.9" OD

Installation: Pool rails can be core-drilled & grouted permanently into pool decks or installed using anchor sockets (ANCH-1) or surface mount bases (SB-F) which are sold separately for applications that require removable railings. Saftron's reusable alignment jig (P-JIG-RTD) can be used to facilitate installation of Anchor Sockets. Two bases or anchor sockets are required for each rail. (See installation instructions     for more details).