SF-24LT Spa Rail

Saftron Single-Post / Three Bend Spa Rail Mod SF-24LTwith Lift & Turn Base  . (Horizontal bar 9" above ground. Includes matching color escutcheons) - 18" W x 24" H ...

*** Freight INCLUDED to contiguous USA destinations ***

* Maintenance-Free * 5 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

This configuration includes the Spa Rail and the Lift & Turn Base.

The Single-Post SF-24 Spa Rail is suitable for use with in-ground Spas that have low sides.  The above-ground installation with the Lift & Turn Base provides 9" of clearance.

For the bare-rail option of this model without the lift & turn base, see SF-24.

Saftron Spa Rails are made of 1/4" thick hard-shell composites that are unaffected by spa chemicals (chlorine, acid & salt), and reinforced internally by Schedule 40 Galvanized Steel that adds strength and rigidity. As the reinforcing core is completely encapsulated, it does not come into contact with air or water, so it will never rust or corrode.

The hard-shell nonconductive material meets applicable codes in all states without the need for bonding (grounding), thus making it ideal to install in any location without having to dig-up patio decks to install grounding cables.

Product Features:

• Color is an integral part of the material and not an after-coat. (Unlike powder-coated steel rails, the finish will never chip or flake).
• Non metallic composite material does not get hot in the sun.
• Immune to the corrosive effects of Salt Water Chlorinator Systems.
• Non-conductive material conforms to NFPA and building codes without having to ground (bond) the rail.
• Maintenance-Free Material and Finish.
• Made in *U*S*A*
• 5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray & Black

Dimensions:

• Rail is 24" High x 18" Wide.
• Horizontal Bar clears Spa Walls up to 9".
• External diameter is the industry standard (1.9" OD)
• Installed height above the deck is 24".

Installation:

Installation of the Lift & Turn Base is fast and simple with the included hardware. Only 3 holes need to be drilled at the mounting location. (Refer to the installation_instructions on this site for more details).