SF-59 Spa Rail

Saftron Single-Post Spa Rail Mod SF-59 with Lift & Turn Base. (Horizontal bar 45" above mounting surface. Includes matching color escutcheons) - 59" H x 18" W ...

*** Freight Included to contiguous USA destinations ***

* Maintenance-Free * 5 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

This configuration is for both the Rail and the Lift & Turn Base.

The Single-Post SF-59 Spa Rail is suitable for use with above-ground Spas up to 45" high

The "Lift & Turn" feature enables the user to rotate the rail 180 degrees with one hand for entry & egress and to facilitate covering and uncovering the Spa.

Other Lift & Turn Models include: SF-24LT (9" clearance); SS-36 (22" clearance); and SF-48 (34" clearance).

Saftron Spa Rails are made of 1/4" thick hard-shell composites that are unaffected by spa chemicals (chlorine, acid & salt), and reinforced internally by Schedule 40 Galvanized Steel that adds strength and rigidity. As the reinforcing core is completely encapsulated, it does not come into contact with air or water, so it will never rust or corrode.

The hard-shell nonconductive material meets applicable codes in all states without the need for bonding (grounding), thus making it ideal to install in any location without having to dig-up patio decks to install grounding cables.

Product Features:

• Mounting Hardware Included.
• Color is an integral part of the material and not an after-coat. (Unlike powder-coated steel rails, the finish will never chip or flake).
• Non metallic composite material does not get hot in the sun.
• Immune to the corrosive effects of Salt Water Chlorinator Systems.
• Non-conductive material conforms to NFPA and building codes without having to ground (bond) the rail.
• Maintenance-Free Material and Finish.
• Made in *U*S*A*
• 5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray & Black

Dimensions:

• Rail is 59" High x 18" Wide.
• Horizontal Bar clears Spa Walls up to 45".
• External diameter is the industry standard (1.9" OD)
• Installed height is 60" above the mounting surface

Installation:

Installation of the Lift & Turn Base is fast and simple with the included hardware. Only 3 holes need to be drilled at the mounting location. (Refer to the installation_instructions on this site for more details).