| Installation instructions: |
| Can be attached to Concrete / Marcite Pool walls or installed outside pools to any suitable surface and used as grab bars, door handles or towel bars… |
- Non-conductive material does not require grounding.
- Kits include all necessary hardware for 15 minute installation.
- Grab Bars will only be as rigid and secure as the supporting foundation. Before installing make sure surface is suitable.
- Avoid scratches. Keep Ex-Bars in box until ready to install. Don’t place Ex-Bars on bare ground.
|
Tools & Materials Required: - Tape Measure & Markers.
- ½” Socket or Wrench
- Battery Powered drill DO NOT USE MAINS-POWERED TOOLS NEAR WATER
- Alligator® Anchors (Included)
- 5/16” Masonry bit (for concrete decks)
- Soft Scrub®
|
|
