SUB-59 Spa Rail

Saftron Model SUB-59 Single-Post Spa "Slide-Under-Spa" Rail with Lift & Turn Base for above-ground Spas. (18" Wide x 59" Tall. Horizontal bar clears 45" Spa Side)

***Free Shipping***

* Maintenance-Free * 6 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

Add to compare Added to comparison table

Shipping info

FREE DELIVERY

Learn more
Payment methods

Learn more
Return Policy

We accept returns

Learn more

Saftron Model SUB-59 Single-Post Spa "Slide-Under-Spa" Rail with Lift & Turn Base for above-ground Spas. (18" Wide x 59" Tall. Horizontal bar clears 45" Spa Side)

***Free Shipping***

* Maintenance-Free * 6 Colors * Non-Corroding * Salt-Chlorinator Proof * Always cool to the touch * 5-Year Factory Warranty *

SUB-59 Spa Rail differs from the SF-59 and SSF-59 models in that it includes a bracket that slides under the SPA for easy installation without need to drill holes into the ground or SPA. The rail attaches to the bracket base and side for added rigidity. Includes Lift & Turn Base. To ensure compatibility with your model of SPA, make sure the SPA can be lifted when empty and that the weight of the water when the SPA is full, will pin the rail bracket against the ground. Optional screws are included to attach the base to the spa side-wall for even greater support.

Suitable for use with above-ground Spas up to 45" high

The "Lift & Turn" feature enables the user to rotate the rail 180 degrees with one hand for entry & egress and to facilitate covering and uncovering the Spa.

Saftron Spa Rails are made of 1/4" thick hard-shell composites that are unaffected by spa chemicals (chlorine, acid & salt), and reinforced internally by Schedule 40 Galvanized Steel that adds strength and rigidity. As the reinforcing core is completely encapsulated, it does not come into contact with air or water, so it will never rust or corrode.

The hard-shell nonconductive material meets applicable codes in all states without the need for bonding (grounding), thus making it ideal to install in any location without having to dig-up patio decks to install grounding cables.

Product Features:

Optional Side-Mounting Hardware Included.
Color is an integral part of the material and not an after-coat. (Unlike powder-coated steel rails, the finish will never chip or flake).
Non metallic composite material does not get hot in the sun.
Immune to the corrosive effects of Salt Water Chlorinator Systems.
Non-conductive material conforms to NFPA and building codes without having to ground (bond) the rail.
Maintenance-Free Material and Finish.
Made in *U*S*A*
5 Year Non Pro-Rated Manufacturer Warranty.

Available Colors: White, Beige, Taupe, Gray, Graphite Gray & Black

Dimensions:

Rail is 59" High x 18" Wide.
Horizontal Bar clears Spa Walls up to 45".
External diameter is the industry standard (1.9" OD)
Installed height is 60" above the mounting surface

Installation:

SPA Bracket slides under SPA when empty. Weight of full SPA holds rail assembly in place. No tools or hardware are needed, but optional side-attachment screws are included. Check with the manufacturer of your Spa before attaching screws to the side of your SPA. (Refer to installation instructions for more details).

Color
White, Beige, Gray, Taupe, Black, Graphite Gray

We provide free shipping to the contiguous 48 states

We accept the following payment methods:

To replace this text with your store's actual info on payment methods, go to "Catalog -> Product tabs" and edit the Payment methods page.

Returns are allowed in the event of defects of workmanship or errors in order processing or shipment. In these cases, we will issue a "call tag" for the return of the defective/erroneous merchandise and ship a replacement at no additional cost to the customer.

In the event that merchandise is received with visible damage to the external packaging, customers are advised to refuse delivery and notify us. (If possible, please provide a photograph).

If damages or defects are not discovered until the packaging is opened, customers should request a Return Material Authorization (RMA). Once an RMA has been completed and returned, we will issue a call tag for the return of the defective or damaged merchandise and ship replacements.

Returns without a prior RMA will not be accepted and credits or replacements will not be issued.

Returns not due to defects or errors on our part are subject to a 25% restocking fee on the value of the merchandise only provided returned items are in new and sellable condition. Outbound and return freight costs under these circumstances are not reimbursable.

Free Freight: Items sold with a delivered price that includes "free freight" have had the freight portion included in the price of the item. Returns of "free freight" items will be reimbursed minus applicable restocking fees and minus the actual outbound freight amount actually paid.

Merchandise returned without an RMA, incomplete, is used or non-new and sellable condition shall not be eligible for a refund.

Reimbursements will be issued within 2-3 weeks of having received the returned item(s) at our warehouse and verified to be complete and in new condition.

Innovative Pool Products assumes no liability for consequential damages regardless of fault. The limit of our liability regardless of circumstances is the maximum amount paid by the customer for the items being returned in the event of a complaint or problem not covered by the manufacturer's warranty.